静电纺丝法制备La2CuO4纳米管阴极材料及其电化学性质研究
Electrochemical Performance of La2CuO4 Nanotube Materials Prepared via Electrospinning Method
作者单位E-mail
孙丽萍 黑龙江大学化学化工与材料学院, 功能无机材料化学教育部重点实验室, 哈尔滨 150080  
赵辉 黑龙江大学化学化工与材料学院, 功能无机材料化学教育部重点实验室, 哈尔滨 150080 zhaohui98@yahoo.com 
王文学 黑龙江大学化学化工与材料学院, 功能无机材料化学教育部重点实验室, 哈尔滨 150080  
李强 黑龙江大学化学化工与材料学院, 功能无机材料化学教育部重点实验室, 哈尔滨 150080  
霍丽华 黑龙江大学化学化工与材料学院, 功能无机材料化学教育部重点实验室, 哈尔滨 150080  
摘要: 采用静电纺丝法制备了一维管状中温固体氧化物燃料电池(ITSOFC)阴极材料La2CuO4。利用XRD、TG-DTA、FT-IR和SEM对材料的结构和微观形貌进行分析。研究表明,700℃烧结2h得到平均直径150纳米、形貌均一的La2CuO4纳米管。900℃烧结0.5h得到纳米管间连接充分并与电解质紧密接触的纤维电极。利用交流阻抗技术对电极的性能进行研究发现,La2CuO4纳米管阴极材料具有比粉体材料更优越的电极性能。纳米管阴极在700℃的极化电阻为1.03Ω·cm2,而同一组成粉体电极的极化电阻为1.61Ω·cm2;氧分压测试结果显示纳米管电极反应的速率控制步骤为电荷转移过程。
关键词: La2CuO4纳米管  中温固体氧化物燃料电池(ITSOFC)  阴极材料  电极反应
基金项目: 国家自然科学基金(No.51072048,51102083);黑龙江省杰出青年科学基金(JC201211)和黑龙江省自然科学基金(B201107)资助项目。
Abstract: La2CuO4 nanotubes are successfully synthesized by electro-spinning technology. The structure and morphology of the materials are characterized by XRD, TG-DTA and SEM, respectively. The results show that La2CuO4 nanotubes with an average diameter of 150 nm are obtained after sintering at 700 ℃ for 2 h. The La2CuO4 nanotube forms sufficient connection with each other, and good contact with the electrolyte after sintering at 900 ℃ for 0.5 h. Comparing the results obtained by Electrochemical Impedance Spectroscopy (EIS), it is clearly observed that the nanotube cathode exhibits superior performance than the powder cathode. The area specific resistance (ASR) of the nanotube cathode is 1.03 Ω·cm2 at 700 ℃ in air, whereas for the powder one with the same composition, the ASRis 1.61 Ω·cm2. The oxygen partial pressure measurement indicates that the charge transfer process is the rate-limiting step of the nanotube electrode reactions.
Keywords: La2CuO4 nanotubes  Intermediate temperature solid oxide fuel cell (ITSOFC)  cathode materials  electrode reaction
投稿时间:2013-06-11 修订日期:2013-10-10
摘要点击次数:  2096
全文下载次数:  2158
孙丽萍,赵辉,王文学,李强,霍丽华.静电纺丝法制备La2CuO4纳米管阴极材料及其电化学性质研究[J].无机化学学报,2014,30(4):757-762.
查看全文  查看/发表评论  下载PDF阅读器
Support information: