| NaBF4对锂离子电池石墨负极性能的影响 |
| Influence of NaBF4 on the Graphite Anode for Li-Ion Battery |
|
| 摘要: 利用恒流充放电、循环伏安、交流阻抗、SEM、EDS等测试技术研究了在锂离子电池石墨负极和浆过程中加入NaBF4对其电化学性能的影响。结果表明:NaBF4的最佳添加量为2%,可明显提高石墨电极的首次放电比容量和充放电效率;电极的自放电性能和循环稳定性得到明显改善。室温条件下,添加了2% NaBF4的电极以放电容量计算的自放电率为0.87%#183;d-1,比未添加时降低了15%;循环伏安、EDS以及SEM测试结果表明,四氟硼酸钠参与了石墨电极的成膜过程,改变了SEI膜的组分和形貌。 |
| 关键词: 锂离子电池 石墨负极 SEI膜 自放电 循环稳定性 |
| 基金项目: |
| Abstract: The influence of NaBF4 on graphite anode for Li-ion battery was studied by adding it into the process of slurry preparation with the methods of galvanostatic charge-discharge, CV, EIS, SEM and EDS. The results showed that: when the amount of NaBF4 was 2%, not only the reversible capacity at the initial cycle was improved, but also the efficiency. The performances of self-discharge and the cycle stability were all both improved. And its self-discharge rate calculated by capacity was 0.87%#183;d-1, reduced15% than it without NaBF4. The results of CV, EDS and SEM tests both suggested that, NaBF4 involved in the process of SEI formation, changing its components and morphology. |
| Keywords: Li-ion battery graphite anode SEI film self-discharge cycle stability |
| 投稿时间：2012-12-28 修订日期：2013-02-11 |
| 摘要点击次数: 2881 |
| 全文下载次数: 2243 |
| 王力臻,张文静,刘玉军,谷书华,孙新科.NaBF4对锂离子电池石墨负极性能的影响[J].无机化学学报,2013,29(7):1407-1413. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| Support information: |
|
|
|
|
|
|
