| SAPO-11分子筛的粒度调控 |
| Particle Size Control for SAPO-11 Molecular Sieves |
|
| 摘要: 采用干凝胶法,通过向合成体系中添加适量的十六烷基三甲基溴化铵(CTAB)或氟化氢(HF)控制SAPO-11分子筛的粒度。采用SEM、XRD、IR、MAS NMR、TPD、TEM、TG-DSC以及低温N2吸附脱附对产物进行表征。结果表明,CTAB或HF的加入不仅能够减小分子筛的粒度,而且能调控分子筛骨架元素组成、表观形貌、孔道结构及酸性质等。其中,CTAB的加入有利于Si进入分子筛骨架,增加产物的酸量;HF的加入使样品由不规则的微米级颗粒调控为500 nm左右的棒状单晶,增强了分子筛的稳定性,但阻止了硅进入骨架,降低产物的酸量。 |
| 关键词: 干凝胶法 SAPO-11 超细 分子筛 |
| 基金项目: 中国石油科技创新基金研究项目(No.2012D-5006-0402)资助项目。 |
| Abstract: In the presence of hexadecyl trimethyl ammonium bromide (CTAB) or fluoride ions (HF), superfine SAPO-11 was obtained via steam-assisted conversion method. The samples were characterized by SEM, XRD, IR, MAS NMR, TPD, TEM, TG-DSC and Nitrogen adsorption-desorption. The introduction of CTAB or HF can not only decrease the particle size, but also control the framework, morphology, pore structure and acid properties of SAPO-11 zeolites. The surfactant (CTAB) promotes the incorporation of Si atoms into the framework and leads to the increase of acid sites. The rod-like SAPO-11 monocrystal with 500 nm can be obtained in the presence of HF. F- ions could contribute to the higher thermal stability of the sample, while they inhibit Si atoms to incorporate into the framework of the zeolite, which causes a significant decrease of acid sites. |
| Keywords: steam-assisted conversion SAPO-11 superfine zeolites |
| 投稿时间：2012-09-24 修订日期：2012-11-16 |
| 摘要点击次数: 2422 |
| 全文下载次数: 3198 |
| 韩磊,崔晓,刘欣梅.SAPO-11分子筛的粒度调控[J].无机化学学报,2013,29(3):565-570. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| Support information: |
|
|
|
|
|
|
