催化增强化学蒸气沉积法在聚酰亚胺上沉积钯-铂合金薄层(英文) |
Formation of Palladium-Platinum Alloy Films on Polyimide by Catalyst-Enhanced Chemical Vapor Deposition |
|
摘要: 以N2,O2作载气,通过催化增强化学蒸气沉积(CECVD)分别制得在聚酰亚胺上的金属铂、钯及其合金薄层。铂、钯配合物的共同沉积可生成Pt-Pd合金薄膜。在Pd-Pt合金的沉积过程中,Pd/Pt的原子数比率随共同沉积的条件改变而变化。O2为载气、300 ℃条件下,用Pd(η3-allyl)(hfac)和Pt(COD)Me2作前驱体共沉积制备Pd-Pt合金,得到含Pd 37.2%,Pt 62.8%且不 |
关键词: 催化增强化学蒸气沉积 聚酰亚胺 钯-铂合金 |
基金项目: |
Abstract: Pd, Pt and their alloy films on polyimide were prepared by Catalyst-Enhanced Chemical Vapor Deposition (CECVD) under the carrier gas (N2, O2). Co-deposition of Pd and Pt complexes was used for deposition of alloy film. During the CVD of palladium-platinum alloy, the Pd/Pt atomic ratios varied with co-deposition conditions. Co-deposition of Pd(η3-allyl)(hfac) and Pt(COD)Me2 under O2 at 300 ℃ produced palladium-platinum alloy containing palladium of 37.2% and platinum of 62.8%, respectively without the contamination of carbon and fluorine. |
Keywords: catalyst-enhanced chemical vapor deposition, polyimide (PI), palladium-platinum alloy |
|
摘要点击次数: 1533 |
全文下载次数: 1898 |
俞开潮,YousefHamadan,程银华,周锦兰,李正佳,于澍燕,焦庆.催化增强化学蒸气沉积法在聚酰亚胺上沉积钯-铂合金薄层(英文)[J].无机化学学报,2006,22(5):789-794. |
查看全文 查看/发表评论 下载PDF阅读器 |
Support information: |
|
|
|