纳米Mn-Zn铁氧体的制备和研究 |
Preparation and Characterization of Nanosize Mn-Zn Ferrite |
|
摘要: |
关键词: 水热法 纳米 Mn1-xZnxFe2O4 |
基金项目: |
Abstract: Nanosize manganese zinc ferrites were fabricated by hydrothermal precipitation route using Fe2(SO4)3, ZnSO4·7H2O, MnSO4·H2O as material, then some calcinated at 500 ℃ and studied by XRD, TEM, IR and VSM. The results showed that the products were spinel crystal structure and uniformly sized nanoparticles (15~25 nm) with little aggregation. The analysis of IR showed that the superficial water can be eliminated, but that was embedded in crystal lattice can not be removed by calcinating. The effect Zn content x on the lattice (a) of nanosize Mn1-xZnxFe2O4 was also discussed. The lattice of nanosize Mn1-xZnxFe2O4 decreases with x increasing; and its value deviated the standard lattice (a0) of normal size manganese zinc ferrites. A lot of water was absorbed during the hydrothermal process owing to the large surface of nanosize particles. The change of magnetic properties of MnxZn1-xFe2O4 with x increasing was studied: nanosize MnxZn1-xFe2O4 particles synthesized by us exhibited peculiar magnetic properties curve with Zn content (x) increasing, Superparamagnetic behaviors of the synthesized ZnFe2O4 samples were confirmed by magnetic characterization, which can be explained by the difference between the distribution of the metal ions (Mn2+, Zn2+ and Fe3+) among the tetrahedral (A) and the octahedral (B) sites of nanosize ferrite and that of bulk ferrite. |
Keywords: hydrothermal nanosize Mn-Zn ferrite |
|
摘要点击次数: 1353 |
全文下载次数: 1553 |
郭秀盈,颜秀茹,霍明亮,王建萍,白 天.纳米Mn-Zn铁氧体的制备和研究[J].无机化学学报,2004,20(5):608-612. |
查看全文 查看/发表评论 下载PDF阅读器 |
Support information: |
|
|
|