电沉积HA/TiO2复合涂层的结合强度和热稳定性研究
Study on the Bonding Strength and Thermal Stability of Electrodeposition HA/TiO2 Composite Coating
作者单位
刘榕芳 福建师范大学化学与材料学院福州 350007 
肖秀峰 福建师范大学化学与材料学院福州 350007 
林岚云 福建师范大学化学与材料学院福州 350007 
倪 军 福建师范大学化学与材料学院福州 350007 
陈古镛 福建师范大学化学与材料学院福州 350007 
摘要: 
关键词: 电沉积 羟基磷灰石 TiO2 复合涂层 热稳定性
基金项目: 
Abstract: HA/TiO2 composite coating were fabricated via adding TiO2 powder in the electrolyte by electrodeposition. The influence of current density and deposition time on the content of TiO2 in the coating, the influence of the content of TiO2 in the coating on the bonding strength of coating and the influence of sintering temperature on the structure and the bonding strength of coating were investigated. The experiment results show that the content of TiO2 in the coating increase with reducing the current density and prolonging the deposition time, the bonding strength improve with increasing the content of TiO2 in the coating, which can obtain 18.7 MPa when the weight percent TiO2 in the coating attain 72.2 %. The addition of TiO2 in the coating reduces the thermal expansion coefficient of the coating, improves the bonding strength of coating and changes the fracture mechanism of the coating from adhesion failure to cohesive failure. HA in the composite coatings is decomposed by the catalysis reaction of TiO2 at the temperature of sinter 850 ℃. Differential scanning calorimetry and X-ray diffractometry analyses showed that the chemical reaction between HA and TiO2 lead to the product are α-TCP and CaTiO3 at the temperature of sinter 1200 ℃. In order to prevent the coating from decomposing and attain hign bonding strength, the sintering temperature should be less than 820 ℃.
Keywords: electrodeposition hydroxyapatite titiania composite coating thermal stability
 
摘要点击次数:  2439
全文下载次数:  1438
刘榕芳,肖秀峰,林岚云,倪 军,陈古镛.电沉积HA/TiO2复合涂层的结合强度和热稳定性研究[J].无机化学学报,2004,20(2):225-230.
查看全文  查看/发表评论  下载PDF阅读器
Support information: